DEWALT 60-Gallon Electric 175 PSI Vertical Air Compressor
$909.30
In stock
Information
Shipping
We currently offer free shipping worldwide on all orders over $100.
Sizing
Fits true to size. Do you need size advice?
Return & exchange
If you are not satisfied with your purchase you can return it to us within 14 days for an exchange or refund. More info.
Assistance
Contact us on (+44) 555 88 65, or email us at [email protected].
| Type | Electric |
|---|---|
| Motor Type | Induction |
| Start Type | Electric start |
| Pump Type | Oil-lubricated |
| Number of Tools Included | 0 |
| Phase | Single-phase |
| Tank Style | Vertical |
| Fitting Size | 3/4-in |
| Tank Capacity (Gallons) | 60 |
| Weight (lbs.) | 200 |
| Amperage | 15 |
| Accessories Included | No |
| Air Delivery SCFM @ 100PSI (CFM) | 0 |
| Air Delivery SCFM @ 175PSI (CFM) | 0 |
| Air Delivery SCFM @ 90PSI (CFM) | 11.5 |
| Decibel Rating (Decibels) | 887 |
| Engine Displacement (Cu. Centimeters) | 0 |
| Maximum Pressure | 175 PSI |
| Noise Rating | Standard (71 decibels or above) |
| Portable | No |
| Rechargeable | No |
| Running Horsepower | 3.7 |
| Stage | Single stage |
| Voltage (Volts) | 208 |
| Warranty | 2-year limited |
| CA Residents: Prop 65 Warning(s) | Yes |
| Safety Listing | CSA safety listing |
| For Use with Brad Nailing/Stapling | Yes |
| For Use with Air Brushing | Yes |
| For Use with Bolting | Yes |
| For Use with Finish Nailing | Yes |
| For Use with Framing Nailing | Yes |
| For Use with Roof Nailing | Yes |
| For Use with Drilling | Yes |
| For Use with Cutting | Yes |
| For Use with Grinding | Yes |
| For Use with Spraying | Yes |
| For Use with Sanding | Yes |
| For Use with Surface Prep | Yes |
| For Use with HVLP Painting | Yes |
| UNSPSC | 40151600 |
Description
-
175 maximum psi: provides more than 2X longer air tool run time compared to other 60 Gallon 135 psi compressors
-
11.5 SCFM at 90 psi – 30% higher psi versus other 60 Gal 135 psi compressors
-
Long-life oil lubricated pump with high efficiency aluminum flywheel provides maximum cooling
-
Spread volt motor designed to operate at 208-Volt and 230-Volt applications
-
Large capacity ASME tank
-
Equipped with pressure gauge and on/off switch
-
Tie down holes on platform sides to secure unit when transporting
Reviews
There are no reviews yet.